The tile adhesive is made of cement, mineral admixtures, quartz sand and organic additives. It is a polymer-modified single-component cement-based tile adhesive mortar. The product has excellent flexibility and bonding properties, as well as good sag resistance, water retention, water resistance and simple and convenient operability.

This product is suitable for pasting the interior walls, floors, bathrooms, kitchens and other parts of decorative bricks such as ceramic tiles, face tiles, floor tiles, etc.

20㎏/bag, under normal storage and transportation conditions, the shelf life of the product is six months. Unopened products should be stored in a dry, cool and ventilated place.

1. First, clean the dust, oil, laitance and debris on the working surface to ensure that the surface should be solid, clean, free of hollows, oil, wax, mold release agents and other loose materials:
2. Add water and dry powder into the mixing container, the mass ratio of dry powder to water is 1:4.5-4.7 (or adjust the amount of water according to the method and feel), mix thoroughly, and there is no raw powder at all. Let it stand for 3-5 minutes , and then stir a little to use.
3. Apply the stirred tile adhesive to the substrate with a toothed trowel, and comb and scrape it evenly. Each application should not exceed 1m2, and ensure that the direction of the stripes is basically the same, and then knead the tile/stone during the drying time. on top.
4. Paste the tile (the tile does not need to be pre-soaked in water), slide it back and forth perpendicular to the stripes, and then press down firmly to completely spread the material and cover the entire tile. If the tile position needs to be adjusted, please complete it within 10 minutes.
5. Nylon crosses are recommended between tiles for consistent spacing and excess adhesive on the tile surface should be removed before hardening.
6. After 24 hours of pasting, caulking can be performed, special caulking agent should be used, and the nylon cross should be removed before caulking.